Rdj300/500-200.2000 Type Advanced Hot Isostatic Press

• Customization: Available
• Warranty: 24 Months
• Feature: High Efficiency
• Model NO.: RDJ300/500-200.2000 Type
• Customized: Customized
• Condition: New
• Maximum Working Pressure: 200MPa
• Maximum Working Temperature: 2000°c
• The Effective Diameter of Heat Zone: 300mm
• The Effective Height of Heat Zone: 500mm
• Loading Mode: Upper Loading
• Power Supply of Whole Machine: Tn-S Income Wire, AC380V, 50Hz
• Install Way: Ground Operation
• Type: Gantry Hydraulic Press
• Certification: ISO9001, CE
• Transport Package: Pallet Package
• Specification: RDJ500/1500-200.2000
• Trademark: SHUOHAIPU
• Origin: China
• HS Code: 8479899951
• Production Capacity: 50 Sets/Year

Product Description

RDJ500/1500-200.2000 Type Hot Isostatic Press 

Main Technical parameters

1. Maximum working pressure:200MPa;
2. Maximum working temperature:2000ºC;
3. Common operating temperature: ≤1800ºC( working temperature≥1700ºC,the serivce life of thermocouple is 1 furnace time);
4. The effective diameter of heat zone:Φ300mm;
5. The effective height of heat zone:500mm;
6. Heating material:C/C composite material;
7. Temperature measuring thermocouple: WRe3/25 thermocouple(JB/T9497-2002);
8. Working medium: Ar ( Purity ≥ 99.99%);
9. Vacuum degree(room temperature,no working parts):≤100Pa;
10. Vacuum extraction time(room temperature,no working parts):t≤15min;
11. Maximum temperature deviation in the effective heat zone(800ºC~1100ºC,no working parts,Heat preservation stage,pressure 30MPa~150MPa,according to GB/T9452-2012, taking out 5 point temperature measurement, Using K level dividing armoured thermocouple workpiece precision measurement (GB/T2614-2010): ≤±10ºC;
12. Heating up time (no working parts): room temperature~1800ºC≤3h;
13. Loading mode:  upper loading;
14. Max loading capacity of work table:150kg;
15. Power supply of whole machine:TN-S income wire,AC380V,50Hz;
16. Full machine installation power:about 400kW;
17. Install way: ground operation;

Operating conditions

1. Altitude:≤2000m;
2. Temperature:+5ºC~+40ºC;
3. Relative humidity of air is not more than  90%(when 20ºC);
4. Power supply requirement:AC380V(±10%),50Hz(±1%),TN-Sincome wire system (Three-phase five wire system);
5. Water supply requirement: Pressure 0.3~0.5MPa, Flow≥30m³/h,Water inlet temperature ≤30ºC,Water outlet temperature≤45ºC;
6. The working limit height of the crane hook in the workshop of the hot isostatic press is  from the ground≥7.5m,hoisting weight≥5t;
7. A place free from fire,serious pollution,chemical corrosion,violent vibration and strong disturbance sources.

 Our main type of press  is as follows:                                  

1. Cold Isostatic Press:

S.NO.	Type	Diameter of Pressure  Vessel	Depth of Pressure  Vessel	Maximum Isostatic  Pressure
1	CIP 200/300-300	200mm	300mm	300Mpa
2	CIP 200/1000-300	200 mm	1000mm	300Mpa
3	CIP 420/4000-320	420mm	4000mm	320Mpa
4	CIP 500/1200-400	500mm	1200mm	400Mpa
5	CIP 500/1500-300	500mm	1500mm	300Mpa
6	CIP 710/2000-250	710mm	2000mm	250Mpa
7	CIP 1000/3500-200	1000mm	3500mm	200Mpa

a. The vessel inner materials is 34CrNi3MoV alloy whole parts forged and then The forged vessel be wire wounded by alloy of wire(65Mn steel 1.5mm x 6mm size) as per the designed.
b.Whole procedure of the cold isostatic pressing (CIP) machine, increasing, holding and releasing pressure is controlled by PLC and also there is a decompression system to protect the system over pressure to keep the machine in safety running

2. Hot Isostatic Press:

S.NO.	Type	Diameter of Pressure Vessel	Height of  Pressure  Vessel	Pressure	Temperature
1	HIP 800/1200-150/1000	800mm	1200mm	150Mpa	1000degrees
2	HIP 1250/2000-200/1400	1250mm	2000mm	200Mpa	1400degrees

3.  Warm Isostatic Press:

S.NO.	Type	Diameter of Vessel	Length of   Vessel	Pressure	Temperature
1	WIP D500-L2000/P200mpa-T300	500mm	2000mm	200Mpa	300degrees
2	WIP D300-L1500/P250mpa-T200	300mm	1500mm	250Mpa	200degrees
3	WIP D630-L2000/P250mpa-T300	630 mm	2000mm	250Mpa	300degrees

a.The vessel inner materials of WIP is 34CrNi3MoV alloy whole parts forged and then The forged vessel be wire wounded by alloy of wire(65Mn steel 1.5mm x 6mm size) as per the designed.
b.Whole procedure of the warm isostatic press machine (WIP ) , increasing, holding and releasing pressure is controlled by PLC and also there is a decompression system to protect the system over pressure to keep the machine in safety running.



Sichuan Suohaipu Isostatic Pressing Technology and Equipment Co., Ltd. is a professional and leading manufacturer in design and producing Isostatic Press Machine, including Cold Isostatic Press(CIP), Warm Isostatic Press(WIP) and Hot Isostatic Press(HIP). Up to now, we have supplied more than 500 sets of the presses to the market.

We have always insisted on technological innovation, obtained dozens of invention patents and utility patents, and formed a complete series of cold isostatic pressing process products, with strong technical backbone, which can quickly meet the special requirements of customers.

We sincerely hope to establish long terms business relations with customers worldwide in the line. Warmly welcome your inquiries, any ideas or suggestions, please feel free to contact us. Your attention and interests to our products would be fully appreciated.

Contact Us

Marketing Manager:	George Sun
Website:	chinasun99.en.made-in-china.com
Address:	88# Zhujiang Road,Nanjing,Jiangsu,China