| Customization: | Available |
|---|---|
| Warranty: | 24 Months |
| Feature: | Automation, Precision, High Efficiency |
Suppliers with verified business licenses
| 1 |
Equipment Name:
|
cold isostatic press
|
| 2 |
Equipment type:
|
Double medium cold isostatic press
|
| 3 |
Maximum design pressure:
|
160MPa
|
| 4 |
Maximum working pressure:
|
≤140MPa
|
| 5 |
The effective inner diameter of Working cylinder vessel for ultra-high pressure vessel : |
Ø 920mm
|
| 6 |
The effective height of Working cylinder vessel for ultra-high pressure vessel: |
2600mm
|
| 7 |
Effective loading inner diameter after adding isolation rubber sleeve:
|
≥Ø830mm
|
| 8 |
Effective loading inner height after adding isolation rubber sleeve:
|
2500mm
|
| 9 |
The working medium of the pressing system :
|
emulsion
|
| 10 |
Pressure transmission medium of the pressing system :
|
emulsion
|
| 11 |
Pressurization system driving medium :
|
L-HM32 anti-wear hydraulic oil
|
| 12 |
No working parts pressure rising time:
|
0~160MPa,t≤ 9.5 min
|
| 13 |
Assistant time: upper plug close+ frame move in:
|
t≤ 2.5 min
|
| 14 |
Assistant time: upper plug open+frame remove:
|
t≤ 2.5 min
|
| 15 |
Pressure hold time :
|
0~9999s Setting freely
|
| 16 |
Pressure falls during pressure holding :
|
hold 30min,falls≤2% (With automatic pressure compensation ) |
| 17 |
High pressure pressure measurement accuracy:
|
0.5 level
|
| 18 |
Control mode:
|
PLC(Siemens)+HMI(MCGS) / Automatic and Manual mode
|
| 19 |
Pressure increase mode:
|
One reciprocating supercharger is configured for
pressure increase,gradable pause.
(Two segment pause can be set.)
|
| 20 |
Pressure relief mode:
|
Automatic pressure relief with two-stage
pause.Speed is manually adjustable
|
| 21 |
Install Way:
|
Vertical installation in pit
|
| 22 |
Power Supply system:
|
50Hz,AC380V, Three-phase five wire system
|
| 23 |
Working condition:
|
0 ºC~ 45 ºC, Relative Humidity not more than
90%
|
| 24 |
Install Power:
|
≈80kw
|
| 25 |
Equipment weight:
|
≈ 75 ton
|
1.Supply one year normal uses spare parts within warranty time.
2.Supply technical support during the whole life of the press machine.
3.Training Technicians and operators for the buyer.
4.Delivery one set of technical documents.
5.Send technicians to the buyers workshop to guide buyer make the installation and commissioning free of charges.The fly ticket and the board and lodging on the buyer's account.
6.One year later(after the warranty), spare parts still also would be supplied by us but the charges to be on the buyer's account.
){kind=link}