Advanced Hot Isostatic Press Machine, Hydraulic Press, Hip Press, Hip, Hip Press Machine

• Customization: Available
• Warranty: 24 Months
• Feature: High Efficiency
• Model NO.: RDJ500/1500-200.2000 Type
• Customized: Customized
• Condition: New
• Maximum Working Pressure: 200MPa
• Maximum Working Temperature: 2000°c
• The Effective Diameter of Heat Zone: 500mm
• The Effective Height of Heat Zone: 1500mm
• Pressure Measurement Accuracy: ≤0.5%F.S
• Type: Gantry Hydraulic Press
• Certification: ISO9001, CE
• Transport Package: Pallet Package
• Specification: RDJ500/1500-200.2000
• Trademark: SHUOHAIPU
• Origin: China
• HS Code: 8479899951
• Production Capacity: 50 Sets/Year

Product Description

RDJ500/1500-200.2000 Type Hot Isostatic Press 

Main Technical parameters

 

1. Maximum working pressure: 200MPa;
2. Maximum working temperature: 2000ºC,Common operating temperature:1850ºC;
3. The effective diameter of heat zone:Φ500mm;
4. The effective height of heat zone:1500mm;
5. Heating material:C/C;
6. Temperature thermocouple:WRe3/25(JB/T9497-2002),when working temperature is not less than1700ºC,the Thermocouple service life is 1 furnace time;
7. Working medium:high purity nitrogen or argon(99.99%);
8. Vacuum degree(room temperature,no working parts):≤500Pa; 
9. Vacuum time(room temperature,no working parts):t≤30min;
10. Maximum temperature deviation of effective hot zone from 800ºC to 1850ºC(no working parts,Heat preservation stage,pressure 50MPa~150MPa,Refer to GB/T9452-2012 and adopt the WRE3/25 workpiece thermocouple for 9 point temperature measurement):≤±10ºC;
11. Heating up time(no working parts):room temperature~1850ºC≤4h;
12. 0~60MPa Prepressurized time(no working part):≤4h;
13. Maximum weight capacity of working table:600kg;
14. Gas recovery rate:≥80%;
15.  Pressure measurement accuracy:≤0.5%F.S.;
16. Loading mode: upper loading;
17. Install way: Pit installation, ground operation

Operating conditions

1. Altitude:≤2000m;
2. Temperature:+5ºC~+40ºC;
3. Relative humidity of air is not more than 90%(20ºC);
4. Power supply requirement:Installation power is about 1200kW(AC380V±10%,50Hz±1%,TN-S income wire system);
5. Water supply requirement:Pressure0.3~0.5MPa, Flow≥50m³/h,Water inlet temperature ≤30ºC,Water outlet temperature≤45ºC;
6. The working limit height of the crane hook in the workshop of the hot isostatic press is  from the ground≥5.5m,hoisting weight≥6t;
7. A place free from fire,serious pollution,chemical corrosion,violent vibration and strong disturbance sources.

 Our main type of press  is as follows:                                  

1. Cold Isostatic Press:

S.NO.	Type	Diameter of Pressure  Vessel	Depth of Pressure  Vessel	Maximum Isostatic  Pressure
1	CIP 200/300-300	200mm	300mm	300Mpa
2	CIP 200/1000-300	200 mm	1000mm	300Mpa
3	CIP 420/4000-320	420mm	4000mm	320Mpa
4	CIP 500/1200-400	500mm	1200mm	400Mpa
5	CIP 500/1500-300	500mm	1500mm	300Mpa
6	CIP 710/2000-250	710mm	2000mm	250Mpa
7	CIP 1000/3500-200	1000mm	3500mm	200Mpa

a. The vessel inner materials is 34CrNi3MoV alloy whole parts forged and then The forged vessel be wire wounded by alloy of wire(65Mn steel 1.5mm x 6mm size) as per the designed.
b.Whole procedure of the cold isostatic pressing (CIP) machine, increasing, holding and releasing pressure is controlled by PLC and also there is a decompression system to protect the system over pressure to keep the machine in safety running

2. Hot Isostatic Press:

S.NO.	Type	Diameter of Pressure Vessel	Height of  Pressure  Vessel	Pressure	Temperature
1	HIP 800/1200-150/1000	800mm	1200mm	150Mpa	1000degrees
2	HIP 1250/2000-200/1400	1250mm	2000mm	200Mpa	1400degrees

3.  Warm Isostatic Press:

S.NO.	Type	Diameter of Vessel	Length of   Vessel	Pressure	Temperature
1	WIP D500-L2000/P200mpa-T300	500mm	2000mm	200Mpa	300degrees
2	WIP D300-L1500/P250mpa-T200	300mm	1500mm	250Mpa	200degrees
3	WIP D630-L2000/P250mpa-T300	630 mm	2000mm	250Mpa	300degrees

a.The vessel inner materials of WIP is 34CrNi3MoV alloy whole parts forged and then The forged vessel be wire wounded by alloy of wire(65Mn steel 1.5mm x 6mm size) as per the designed.
b.Whole procedure of the warm isostatic press machine (WIP ) , increasing, holding and releasing pressure is controlled by PLC and also there is a decompression system to protect the system over pressure to keep the machine in safety running.



Sichuan Suohaipu Isostatic Pressing Technology and Equipment Co., Ltd. is a professional and leading manufacturer in design and producing Isostatic Press Machine, including Cold Isostatic Press(CIP), Warm Isostatic Press(WIP) and Hot Isostatic Press(HIP). Up to now, we have supplied more than 500 sets of the presses to the market.

We have always insisted on technological innovation, obtained dozens of invention patents and utility patents, and formed a complete series of cold isostatic pressing process products, with strong technical backbone, which can quickly meet the special requirements of customers.

We sincerely hope to establish long terms business relations with customers worldwide in the line. Warmly welcome your inquiries, any ideas or suggestions, please feel free to contact us. Your attention and interests to our products would be fully appreciated.

Contact Us

Marketing Manager:	George Sun
Website:	chinasun99.en.made-in-china.com
Address:	88# Zhujiang Road,Nanjing,Jiangsu,China