CIP500/1200-400YS Main Technical Qualification
Main Technical parameters
- Equipment Name: cold isostatic press
- Equipment type: CIP500/1200-400YS
- Characteristics: a. Both of cylinder vessel and yoke frame made by pre-stressed steel wire wound Inner cylinder vessel materials: 34CrNi3Mov alloy, Whole part forged designed service life more than 300,000 times pressing b. Double working mediums and isolated c. Yoke frame moving mode
- Maximum working pressure of Working cylinder: 400MPa
- Maximum working pressure of supercharger: 400MPa
- The effective inner diameter of suppress cylinder vessel: Ø 500mm
- The effective inner height of suppress cylinder vessel: 1200mm
- useful filling diameter of suppress cylinder vessel: Ø420mm
- useful filling height of suppress cylinder vessel: 1150mm
- Pressing system Working medium : emulsion (90-95% water, 5-10% anti-corrosive additive).
- Hydraulic system driving medium : L-HM32 anti-wear hydraulic oil
- Compression system Transmission medium : 55% L-HM32 + 45% Kerosene.
- No working parts pressure rising time: 0~400MPa,t≤6 min
- Assistant time: upper plug close+ frame move in:t≤1.5min upper plug open+frame remove : t≤1.5min
- pressure hold time : 0~9999s Setting freely
- pressure falls during pressure holding : hold 30min,falls≤2% (pressure setable self-compensation automatically )
- .High pressure measurement accuracy: 0.5%FS
- Equipped with 3 sets of high efficiency and reliability Supercharger: a.Reciprocating plunger type supercharging, contactless switch mode commutation which controlled by DC24V power supply, b. The maximum output flow rate is 3.8 L/min for each supercharger, The seal service life: more than 10 thousand times pressing c.The cylinder main materials: martensitic precipitation hardening stainless steel d.Designed and manufactured by Suohaipu Isostatic with Independent intellectual property rights
- Control mode: PLC(Siemens)+HMI(MCGS) / Automatic and Manual mode
- Pressure relief mode: Multistage pressure relief, speed automatic and manual adjustable
- Isolation System: Adopt double mediums working style with rubber sleeve isolation system.
- Cooling System: With independent cooling system and does not require external cooling water.
- Safety Protection: With mechanical safety protection, Electric control protection and On-site safety warning
- Total weight 25-27MT,the biggest weight is the yoke frame,15MT about, and the second weight is the cylinder vessel: 8.5MT about.
- With CE Certificate with PED directive
- Install Way: on floor install
- Power Supply system: 50Hz,380V,Three-phase five wire system
- Working condition 0 ºC~ 45 ºC, Relative Humidity not more than 90%
- Warranty: for two years
- Install Power : ≈ 80 kw
- Install area: ≈30 m2
Our main type of press is as follows:
1. Cold Isostatic Press:
| S.NO. |
Type |
Diameter of Pressure
Vessel |
Depth of Pressure
Vessel |
Maximum Isostatic
Pressure |
| 1 |
CIP 200/300-300 |
200mm |
300mm |
300Mpa |
| 2 |
CIP 200/1000-300 |
200 mm |
1000mm |
300Mpa |
| 3 |
CIP 420/4000-320 |
420mm |
4000mm |
320Mpa |
| 4 |
CIP 500/1200-400 |
500mm |
1200mm |
400Mpa |
| 5 |
CIP 500/1500-300 |
500mm |
1500mm |
300Mpa |
| 6 |
CIP 710/2000-250 |
710mm |
2000mm |
250Mpa |
| 7 |
CIP 1000/3500-200 |
1000mm |
3500mm |
200Mpa |
a. The vessel inner materials is 34CrNi3MoV alloy whole parts forged and then The forged vessel be wire wounded by alloy of wire(65Mn steel 1.5mm x 6mm size) as per the designed.
b.Whole procedure of the
cold isostatic pressing (CIP) machine, increasing, holding and releasing pressure is controlled by PLC and also there is a decompression system to protect the system over pressure to keep the machine in safety running
2. Hot Isostatic Press:
| S.NO. |
Type |
Diameter of
Pressure Vessel |
Height of
Pressure Vessel |
Pressure |
Temperature |
| 1 |
HIP 800/1200-150/1000 |
800mm |
1200mm |
150Mpa |
1000degrees |
| 2 |
HIP 1250/2000-200/1400 |
1250mm |
2000mm |
200Mpa |
1400degrees |
3. Warm Isostatic Press:
| S.NO. |
Type |
Diameter of
Vessel |
Length of
Vessel |
Pressure |
Temperature |
| 1 |
WIP D500-L2000/P200mpa-T300 |
500mm |
2000mm |
200Mpa |
300degrees |
| 2 |
WIP D300-L1500/P250mpa-T200 |
300mm |
1500mm |
250Mpa |
200degrees |
| 3 |
WIP D630-L2000/P250mpa-T300 |
630 mm |
2000mm |
250Mpa |
300degrees |
a.The vessel inner materials of WIP is 34CrNi3MoV alloy whole parts forged and then The forged vessel be wire wounded by alloy of wire(65Mn steel 1.5mm x 6mm size) as per the designed.
b.Whole procedure of the
warm isostatic press machine (WIP ) , increasing, holding and releasing pressure is controlled by PLC and also there is a decompression system to protect the system over pressure to keep the machine in safety running.
Sichuan Suohaipu Isostatic Pressing Technology and Equipment Co., Ltd. is a professional and leading manufacturer in design and producing Isostatic Press Machine, including Cold Isostatic Press(CIP), Warm Isostatic Press(WIP) and Hot Isostatic Press(HIP). Up to now, we have supplied more than 500 sets of the presses to the market.
We have always insisted on technological innovation, obtained dozens of invention patents and utility patents, and formed a complete series of cold isostatic pressing process products, with strong technical backbone, which can quickly meet the special requirements of customers.
We sincerely hope to establish long terms business relations with customers worldwide in the line. Warmly welcome your inquiries, any ideas or suggestions, please feel free to contact us. Your attention and interests to our products would be fully appreciated.
Contact Us
| Marketing Manager: |
George Sun |
| Website: |
chinasun99.en.made-in-china.com |
| Address: |
88# Zhujiang Road,Nanjing,Jiangsu,China |
){kind=link}